Solar PIR Motion Wall Light with Wireless Remote, 60 LEDs

Solar PIR Motion Wall Light with Wireless Remote, 60 LEDs

$48.99

Secure checkout · Shipping calculated before you pay · 30-day returns

⚠ WARNING: California Prop 65. Learn more

Light up patios, decks, driveways, fences and garden paths automatically with this solar wall light. Sixty LEDs reach up to 900 lumens when motion is detected, and a wireless remote lets you change modes and brightness without climbing a ladder.

Key Features

PIR motion sensor: Detects movement across a 120-degree angle at 16.4–26.2 ft, with a 180-degree illumination angle.
Three lighting modes: Dim-to-bright on motion, full brightness on motion, or constant dim light at night.
Wireless remote: Adjust modes and brightness from up to 26.2 ft away.
Up to 3 days of runtime: Two 2200mAh batteries fully charge in about 6 hours of sunlight; the 180-degree rotatable design lets you angle the panel toward the sun.
IP65 and wire-free: Water- and heat-resistant, and mounts with the included screws in any sunny spot.

Specifications

Color: White
Material: ABS
Dimensions (without pole): 3.8 × 9.7 × 1.2 in
Pole: 2.4 × 1.5 × 5.7 in
Weight: 0.89 lb
LEDs: 60; up to 900 lumens; 7W
Solar panel: 5V / 3.2W
Battery: 2 × 3.7V 2200mAh rechargeable Li-ion; remote uses 1 × CR2025
Runtime: Nearly all night (mode 1), 2–3 days (mode 2), 5 hours (mode 3)
Light duration after motion: 15 seconds
Recommended mounting height: 6.6–9.8 ft
Water resistance: IP65
Included: Solar light, remote control, mounting bracket, mounting base, screws, user manual

Peel off the protective film and remove the remote's insulation tab before first use, then charge for 6–12 hours in direct sunlight.

We ship to addresses in the United States, and every order includes tracking. Orders are processed within 1–3 business days, and the exact shipping cost is shown at checkout before you pay. Read the full shipping policy.

Request a return within 30 days of delivery for unused items in their original packaging. If anything arrives damaged, contact us within 48 hours with photos and we'll send a replacement or a full refund. Read the full refund policy.

In your space

Motion-sensing light for your entry

Fix it by your garage, front door or garden pathway and forget about wiring. A motion sensor wakes the 60 LEDs when someone approaches, and a small remote lets you pick the mode you want.

Why you'll love it

60 bright LEDs
Brightness is adjustable by remote, turning dark spaces into well-lit ones.
Wide motion sensing
A PIR sensor covers a 120 degree sensing angle with 180 degree illumination.
Three lighting modes
Fade up on motion, full brightness on motion, or constant dim light at night.
Up to 3 days runtime
Two 2200mAh batteries charge in about 6 hours of sun and last up to 3 days.

Frequently asked questions

How far does the remote work?

The wireless remote works within about 26.2 feet. Remove the insulation sheet before first use.

How long does it take to charge?

About 6 hours of direct sunlight fully charges the two 2200mAh batteries.

Is it waterproof?

Yes. It is rated IP65 and is also heat-resistant.

How do I install it?

Fix it to the wall with the supplied screws in a spot with plenty of sun. No wiring or adapters needed.

Can I adjust the solar panel?

Yes. It rotates 180 degrees so you can angle it toward the sun.

About this product

What it's for: A wire-free solar wall light with a PIR motion sensor and remote control, for security and safety lighting.
Where it works best: Garages, front doors, patios, decks, yards, pathways, driveways and fences.
What's included: The light, a remote control and the supplied mounting screws.
Care: Wipe the solar panel and housing with a soft, damp cloth to keep the panel clear for charging.
Good to know: Peel the protective film before use. Charge 6 to 12 hours in direct sunlight before first use.